A confession: I almost didn’t get this blog post out in time, because I’ve been immersed in the massive world of The Legend of Zelda: Breath of the Wild, on my new Nintendo Switch. I’m not going to go into detail about how I had to wait in line for a few hours on launch night to get mine–those who pre-ordered would admonish me for poor planning, and those who didn’t get theirs when they wanted feel bad enough as it is.
This week’s post is about the surprising move to the increasingly mainstream USB-C connection standard for the Switch’s charger. Faithful readers may remember my discussion of the new USB-C connector when Apple incorporated it—and nothing else—into their latest MacBook Pro at the end of 2016. Does this mean the days of having to pack multiple chargers and cables are at an end? Well, maybe.
It’s true that the Switch does get its power from a USB-C AC adapter. When placed in its included dock, the power cord fits in a compartment in the back, hidden by a discreet plastic panel. The other end is a beefy transformer brick, so make sure you have room on your power strip or wall outlet for it. To be safe, I invested in APC’s P11VT3 SurgeArrest Surge Protector, with its six widely-spaced outlets.
But what if I didn’t want to use Nintendo’s included power brick?
It’s not an entirely absurd question. The charm of the Switch is that it is entirely portable, as much a successor to Nintendo’s Game Boy and DS handhelds, as it is to their Wii and Wii U set-top consoles. When out of the tabletop dock, the Switch charges off a USB-C port on its bottom. Nintendo’s thinking, I’d wager, is that gamers who plan on traveling with their Switch in “handheld” mode will leave their dock plugged in to the home power outlet; and that those gamers will invest in a second Nintendo Switch charging brick to keep in their officially-licensed Switch Carrying Case while on-the-go.
And that is indeed a solution, if a bit clunky.
The dream of USB charging is only to have to carry one power brick, and only one charging cable. The cable is a separate piece in this dream, because you may need to use it to sync data between devices while not charging. USB is a multi-faceted standard, after all. The problem as I see it comes from the power needs of the various devices that employ USB-C chargers.
Let’s start with that MacBook Pro from last year. The 13-inch model uses a 61 Watt power adapter, and the 15-inch model uses an 87 Watt adapter. Their little sibling, the 12-inch MacBook from 2015 and 2016, uses a 29 Watt USB-C adapter. Apple’s official line is that the higher-wattage adapter will work just fine on devices with smaller power demands, but not vice versa. That is to say, go ahead and charge the 12- or 13-inch laptops with that 87 Watt 15-inch adapter, but don’t try to juice up your 15-inch laptop with only 29 or 61 Watts.
Okay, great, so I can use that charger on my Switch?
To determine the Switch’s power needs, a little electrical engineering math is required. The official Switch AC adapter outputs between 5 and 15 Volts at 2.6 Amps (most likely depending on whether the Switch is docked or not). Multiplying 15 by 2.6 gets 39 Watts, so the MacBook Pro adapters—be they 61 or 87 Watts—should make short work of delivering power to anything that needs less than that.
One mustn’t ignore those pesky Amps, though. The power supply you want to use must match or exceed your device’s needs, both in power (Wattage) and electric current (Amperage). My 29W MacBook adapter, for example, outputs either 14.5V at 2.0A if the attached device supports the USB Power Delivery (USB PD) standard; or 5.2V at 2.4A if it doesn’t.
The Switch, as discussed in this Reddit thread, does indeed support USB PD. Since the Switch charges best at 2.6A or higher, my MacBook charger just falls short of the current needs; but it’s also about 10W shy on the power front, so it’s a non-starter either way.
That 87W MacBook Pro charger, on the other hand, delivers a maximum of 20V at 4.3A. Unless something goes horribly wrong, the Switch’s circuitry is smart enough to pull only as much power as it needs, at the highest current it can handle. The 87W charger can deliver all 15V and 2.6A without breaking a sweat. So that will work for your USB-C-equipped MacBook (or Pro), as well as your Switch.
But what if you want to use a multi-port charger?
This is where it gets tricky. In my living room, I have an Anker PowerPort Speed 5 USB Charger in a convenient spot next to my couch. This lets me juice up my phone, plus any other four USB-charged devices I can think of. For reference, my iPhone 7 comes with a 5W charger: 5V at 1A, so I’m in good shape as long as the PowerPort delivers at least that much per port.
From Anker’s website: “The Speed Series was created for one single purpose: To deliver the fastest charge possible to any and all USB devices.”
Utilizing Qualcomm’s QuickCharge 3.0 power delivery standard, the PowerPort outputs between 3.6 and 6.5V at 3A (19.5W); between 6.5 and 9V at 2A (18W); or between 9 and 12V at 1.5A (again, 18W). Insufficient to juice up my Switch (which, for the record, does not support Quick Charge or Dash Charge, according to this write-up.)
The PowerPort is split up, with two QC3.0 ports (the blue ports in the photo above), and three “PowerIQ™” ports. The PowerIQ™ ports output 5V at 4.8A, with a limit of 2.4A per port. Again, not enough Voltage, not enough Amperage. I mean, it’s fine for my iPhone, just not for my Switch.
That’s fine. I expect to have to upgrade some of my charging accessories when I get a new gadget (remember that new surge strip I bought?). So I went back to Anker’s website to see what they could do for me and my Switch.
I started with their PowerPort 5 USB-C (below).
From their spec list: “1 USB-C Port: 5V 3A max” This may actually do the trick, and here’s why: if you’ll recall, the Switch charger outputs between 5V and 15V. If I’m looking for a handy side-table solution for recharging the Switch when it’s out of its set-top dock, I may only need 5V; and since 2.6A is the current requirement, the PowerPort’s 3A spec meets that requirement, as well.
I was feeling adventurous, so I perused the rest of Anker’s selection, to see if they offered any USB charging solutions with higher Voltage. Their PowerPort+ 5 USB-C with USB Power Delivery outputs between 5V and 15V at 3A, or 20V at 2.25A, a maximum of 45W in any scenario.
I feel more confident ordering the PowerPort+, since it boasts USB PD support (just like the Switch, and even my MacBook charger). My rule of thumb is to match as many of the “manufacturer’s accessory” specs as possible, and this does just that.
Interestingly, Anker currently doesn’t sell any chargers with more than one USB-C port. I kind of get it. It’s still a new technology, and they’d certainly want to avoid any further problems with the spec, like they had last August.
But some of us also want to recharge our Nintendo Switch Pro Controller (sold separately, of course), which also uses a USB-C port!
I imagine in most scenarios, the Pro Controller will charge on the side table (off that PowerPort+, for example); while the Switch sits docked across the room, by the TV. When it’s time to leave the house, the Switch comes out of its dock and the Pro Controller stays home. The Switch can then travel with its own one-port charger—be it from Nintendo, or another reliable supplier (as long as that charger meets the specs); or a multi-port charger, again, like the PowerPort+.
Anker’s chief rival in the USB charging space, Aukey, does offer a charging station with two USB-C ports, the Amp USB-C 6-Port Charging Station with Quick Charge 3.0.
But look at the specs from Aukey’s site:
(Quick Charge 3.0): 3.6V-6.5V 3A | 6.5V-9V 2A | 9V-12V 1.5A
Remembering that the Switch (and by extension, its Pro Controller) does not support QC3.0, you’re probably not going to get that 6.5V/3A charge from either port.
For now, if you want a multiple-port solution that can charge a Switch OR its Pro Controller (but not both at the same time), I’m recommending the Anker PowerPort+ 5 USB-C with USB Power Delivery. If you only need one port, you might as well stick with Nintendo’s own charger.
One final word of warning: since USB-C is still so new; and since it’s always tempting to get the least-expensive cable you can; make sure you get a trustworthy USB-C cable to plug into your new charger, whatever you plan on powering. A good place to start is http://bensonapproved.com. From their website:
All USB Type-C (USB-C) Cables and Accessories are not created equal. Some will charge most efficiently, others might just fry your battery. Google Chromebook engineer and Caped Cable Crusader Benson Leung has been testing USB Type-C (USB-C) cables off Amazon, and it’s not just the no-brand products that have been failing. Benson’s campaign mostly consists of ordering USB Type-C (USB-C) cables off Amazon, testing them to see if they meet the minimum standards or if they’re just knock-offs, and then leaving Amazon reviews. Cables and chargers fail in all sorts of different ways, although incorrect resistors seem to be a common problem that Benson’s been finding. bensonapproved.com lists all USB Type-C (USB-C) Cables and Accessories approved by Benson. For more info follow us on Twitter @bensonapproved or contact us at email@example.com.
For the record, here are Benson’s recommended USB-C to USB-C cables.
So that’s this week’s post. If you’ve already gotten your Switch (or it’s on the way), I hope this post proves useful, and you can enjoy your new Nintendo system worry-free. After all, from one Zelda fan to another, “It’s dangerous to go alone.”
Oh, and if you refuse to get a new console when it first comes out, then this video is for you: